Bảng 250 tiêu chuẩn liên quan đến đo rung động
- T5, 09 / 2016
- 6462 lượt đã xem
Nhằm dễ hình dung cũng như tra cứu các tiêu chuẩn có liên quan đến rung động, chúng tôi xin liệt kê lại hơn 250 Tiêu chuẩn liên quan gồm: AS BS DIN EN GB (China) IEC ISO JIS MIL VDI
Number / Source |
Title | |
ANSI S2.1 | Vibration and Shock – Vocabulary | |
ANSI S2.2 | Methods for the Calibration of Shock and Vibration Pickups | |
ANSI S2.4 | Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration Measurements | |
ANSI S2.7 | Balancing Terminology | |
ANSI S2.13 | Mechanical Vibration of Non-Reciprocating Machines – Measurements on Rotating Shafts and Evaluation Part 1: General Guidelines |
|
ANSI S2.16 | Vibration Noise Measurements and Acceptance Criteria of Shipboard Equipment | |
ANSI S2.17 | Machinery Vibration Measurement | |
ANSI S2.19 | Mechanical Vibration – Balance Quality Requirements of Rigid Rotors Part 1: Determination of Permissible Residual Unbalance |
|
ANSI S2.25 | Guide for the Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships | |
ANSI S2.26 | American National Standard Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment | |
ANSI S2.28 | Guide for the Measurement and Evaluation of Vibration of Shipboard Machinery | |
ANSI S2.29 | Guide for the Measurement and Evaluation of Vibration of Machine Shafts on Shipboard Machinery | |
ANSI S2.40 | Mechanical Vibration of Rotating and Reciprocating Machinery – Requirements for Instruments for Measuring Vibration Severity | |
ANSI S2.41 | Mechanical Vibration of Large Rotating Machines with Speed Range from 10 to 200 rev/s – Measurement and Evaluation of Mechanical Vibration Severity in situ | |
ANSI S2.42 | Procedures for Balancing of Flexible Rotors | |
ANSI S2.43 | Criteria for Evaluating Flexible Rotor Balance | |
ANSI S2.45 | Electrodynamic Test Equipment for Generating Vibration – Method of Describing Equipment Characteristics | |
ANSI S2.46 | Characteristics to be Specified for Seismic Transducers | |
ANSI S2.47 | Vibration of Buildings – Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings | |
ANSI S2.48 | Servo-Hydraulic Test Equipment for Generating Vibration – Methods of Describing Characteristics | |
ANSI S2.58 | Auxiliary Tables for Vibration Generators – Methods of Describing Equipment Characteristics | |
ANSI S2.61 | Guide to the Mechanical Mounting of Accelerometers | |
ANSI S2.70 | Guide for the Measurement and Evaluation of Human Exposure to Vibration Transmitted to the Hand | |
ANSI S2.73 | Mechanical Vibration and Shock–Hand-arm Vibration–Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand | |
ANSI S3.18 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration (ISO 2631) | |
ANSI S3.29 | Guide to the Evaluation of Human Exposure to Vibration in Buildings | |
ANSI S3.32 | Mechanical Vibration and Shock Affecting Man – Vocabulary | |
ANSI S3.34 | Human Exposure to Vibration Transmitted to the Hand, Guide for Measurement and Evaluation of | |
ANSI S3.40 | Mechanical Vibration and Shock – Hand-Arm Vibration – Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand (ISO 10819) | |
ANSI S12.11 | Acoustics – Measurement of noise and vibration of small air-moving devices Part 2: Structure-borne vibration |
|
ANSI/AGMA 6000-B96 | Specification for Measurement of Linear Vibration on Gear Units | |
ANSI/ASHRAE 87.1 | Method of Testing Fan Vibration–Blade Vibrations and Critical Speeds | |
ANSI/ASHRAE 87.3 | Methods of Testing Propeller Fan Vibration—-Diagnostic Test Methods | |
ARI 530-95 | Method of Rating Sound and Vibration of Refrigerant Compressors | |
AS 1359.114 | Rotating electrical machines – General requirements – Vibration measurements and limits (IEC 34-14) | |
AS 1807.17 AS 1807.18 | Cleanrooms, workstations, safety cabinets and pharmaceutical isolators – Methods of test Part 17: Determination of vibration in cleanrooms Part 18: Determination of vibration in workstations, safety cabinets and pharmaceutical isolators | |
AS 2362.15 | Fire detection, warning, control and intercom systems – Methods of test – Vibration test | |
AS 2400.10 | Packaging – Protection against shock and vibration (cushioning) | |
AS 2582.6 AS 2582.11 | Complete, filled transport packages – Methods of test Part 6: Vibration test at fixed low frequency Part 11: Sinusoidal vibration tests using a variable frequency | |
AS 2606 | Vibration and shock – Vocabulary (ISO 2041) | |
AS 2625.1 AS 2625.4 | Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts (ISO 10816) Part 1: General guidelines Part 4: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ | |
AS 2641 | Vibration and shock – Balancing – Vocabulary (ISO 1925) | |
AS 2670.1 AS 2670.2 AS 2670.4 | Evaluation of human exposure to whole-body vibration (ISO 2631) Part 1: General requirements Part 2: Continuous and shock-induced vibration in buildings (1 to 80 Hz) Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems | |
AS 2763 | Vibration and shock – Hand-transmitted vibration – Guidelines for measurement and assessment of human exposure | |
AS 2775 | Mechanical vibration and shock – Mechanical mounting of accelerometers (ISO 5348) | |
AS 2955 | Earth-moving machinery – Tests and measurements – Operator seat – Transmitted vibration | |
AS 2973 | Vibration and shock – Human response vibration-measuring instrumentation | |
AS 2993 | Vibration and shock – Dynamic characteristics of the human body – Driving point impedance of the human body | |
AS 3658 | Vibration and shock – Mechanical vibration and shock affecting humans – Vocabulary (ISO 5805) | |
AS 3709 | Vibration and shock – Balance quality of rotating rigid bodies (ISO 1940-1) | |
AS 3721 | Vibration and shock – Balancing machines – Description and evaluation (ISO 2953) | |
AS 3728 | Vibration and shock – Resilient shaft couplings – Information to be supplied by users and manufacturers | |
AS 3762 | Measurement and reporting of local vibration data of ship structures and equipment (ISO 4868) | |
AS 3763 | Mechanical vibration and shock – Guidelines for the overall evaluation of vibration in merchant ships (ISO 6954) | |
AS 3764 | The measurement and reporting of shipboard vibration data (ISO 4867) | |
AS 4594.5 | Internal combustion engines – Performance – Engines for land, rail-traction and marine use – Torsional vibrations (ISO 3046) | |
ASTM D999-01 | Standard Methods for Vibration Testing of Shipping Containers | |
ASTM D3580-95 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products | |
ASTM D4728-01 | Standard Test Method for Random Vibration Testing of Shipping Containers | |
ASTM D5112-98 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products | |
ASTM D6874-03 | Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration | |
BS 848-7 | Fans for general purposes. Specifications for balancing and vibration (ISO 14694) | |
BS 848-10 | Fans for general purposes. Performance testing of jet fans (ISO 13350) | |
BS 2011-2 | Environmental testing. Tests. Test Fda. Random vibration – wide band reproducibility high | |
BS 2782 | Methods of testing plastics (ISO 6721) | |
BS 3015 | Glossary of terms relating to mechanical vibration and shock (ISO 2041) | |
BS 3375 | Management services. Guide to determination of exposure limits, recovery times and relaxation times in work measurement | |
BS 4220 | Tests for a seat intended for a nominated tractor model; provides for measurement of transmitted vertical vibration on artificial track. | |
BS 4675-2 | Mechanical vibration in rotating machinery. Requirements for instruments for measuring vibration severity (ISO 2954) | |
BS 4999-142 | General requirements for rotating electrical machines. Specification for mechanical performance: vibration | |
BS 5000-3 | Specifies generators with outputs greater than 0.75 kW or kVA per 100 r/min, matched to characteristics of internal combustion engines. Torsional and linear vibrational withstand levels are specified | |
BS 5228-1 BS 5228-2 BS 5228-3 BS 5228-4 BS 5228-5 | Noise and vibration control on construction and open sites. Part 1: Code of practice for basic information and procedures for noise and vibration control Part 2: Guide to noise and vibration control legislation for construction and demolition including road construction and maintenance Part 3: Code of practice applicable to surface coal extraction by opencast methods Part 4: Code of practice for noise and vibration control applicable to piling operations Part 5: Code of practice applicable to surface mineral extraction (except coal) sites |
|
BS 6140-2 | Test equipment for generating vibration. Methods of describing characteristics of auxiliary tables for test equipment for generating vibration (ISO 6070) | |
BS 6414 | Method for specifying characteristics of vibration and shock isolators (ISO 2017) | |
BS 6472 | Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz) | |
BS 6611 | Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz) | |
BS 6632 | Method for measurement and reporting of shipboard vibration data (ISO 4867) | |
BS 6633 | Method for measurement and reporting of local vibration data of ship structures and equipment (ISO 4868) | |
BS 6794 | Method for reporting measured vibration data for land vehicles (ISO 8002) | |
BS 6841 | Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock | |
BS 6861-1 BS 6861-2 | Mechanical vibration. Balance quality requirements of rigid rotors. Part 1: Method for determination of permissible residual unbalance (ISO 1940-1) Part 2: Mechanical vibration. Balance quality requirements of rigid rotors. Balance errors (ISO 1940-2) | |
BS 6897 | Experimental determination of mechanical mobility (ISO 7626) | |
BS 6916-8 | Chain saws. Method of measurement of hand-transmitted vibration (ISO 7505) | |
BS 6955-1..22 | Calibration of vibration and shock pick-ups (ISO 5347) | |
BS 7085 | Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock | |
BS 7119 | Specification for shock and vibration measurements: characteristics to be specified for seismic pick-ups (ISO 8042) | |
BS 7385-1 BS 7385-2 |
Evaluation and measurement for vibration in buildings. Part 1: Guide for measurement of vibrations and evaluation of their effects on buildings (ISO 4866) Part 2: Guide to damage levels from groundborne vibration | |
BS 7482-1 BS 7482-2 BS 7482-3 |
Instrumentation for the measurement of vibration exposure of human beings. Part 1: Specification for general requirements for instrumentation for measuring the vibration applied to human beings Part 2: Specification for instrumentation for measuring vibration transmitted to the hand Part 3: Specification for instrumentation for measuring vibration exposure to the whole body | |
BS 7527-2.6 | Classification of environmental conditions. Environmental conditions appearing in nature. Earthquake vibration and shock (IEC 60721-2-6) | |
BS 7698-9 | Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations (ISO 8528-9) | |
BS 7853 | Mechanical vibration. Road surface profiles. Reporting of measured data (ISO 8608) | |
BS 7854 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts (ISO 10816) | |
CR 1030-1 CR 1030-2 |
Hand-arm vibration – Guidelines for vibration hazards reduction Part 1: Engineering methods by design of machinery Part 2: Management measures at the workplace | |
CR 12349 | Mechanical vibration – Guide to the health effects of vibration on the human body | |
DIN 1311-1 DIN 1311-2 DIN 1311-3 DIN 1311-4 |
Mechanical vibrations, oscillation and vibration systems Part 1: Basic concepts, survey Part 2: Linear vibration systems with single degree of freedom Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom Part 4: Vibration; vibrating continua, waves |
|
DIN 3979 | Tooth Damage on Gear Trains; Designation, Characteristics, Causes | |
DIN 4150-1 DIN 4150-2 DIN 4150-3 |
Vibrations in buildings Part 1: Prediction of vibration parameters Part 2: Effects on persons in buildings Part 3: Effects on structures |
|
DIN 4178 | Construction supervision: technical building regulations; bell towers | |
DIN 5426-1 | Rolling bearings – Rolling bearing vibration and noise Part 1: Methods for measurement of structure-borne noise |
|
DIN 25475-2 | Nuclear facilities – Operational monitoring Part 2: Vibration monitoring for early detection of changes in the vibrational behaviour of the primary coolant circuit in pressurized water reactors |
|
DIN 30787-6 | Transportation loads – Measurement and evaluation of dynamic mechanical loads Part 6: Automatic recording systems for measuring random shock while monitoring transports |
|
DIN 31692-3 | Plain bearings Part 3: Vibration monitoring |
|
DIN 45635-8 | Determination of airborne noise emitted by machines by, measurement of structure borne noise; basic requirements | |
DIN 45661 | Vibration measuring instrumentation – Vocabulary | |
DIN 45662 | Vibration measuring instrumentation – Fundamental requirements and verification | |
DIN 45667 | Classification methods for evaluation of random vibrations | |
DIN 45669-1 DIN 45669-2 DIN 45669-3 |
Measurement of vibration immission Part 1: Vibration meters; requirements, verification Part 2: Measuring method Part 3: Test (calibration and assessment) of the vibration measuring instrumentation; Primary test, verification, intermediate test, functional check in situ (draft standard) |
|
DIN 45671-1 DIN 45671-2 DIN 45671-3 |
Measurement of exposure to occupational vibration Part 1: Vibration meters; Requirements, testing Part 2: replaced by ISO 5349-2 Part 3: Test (calibration and assessment) of the vibration meter; primary test, verification, intermediate test, check in situ |
|
DIN 45672-1 DIN 45672-2 |
Vibration measurement associated with railway traffic systems Part 1: Measuring method Part 2: Evaluation method |
|
DIN 45673-1 DIN 45673-2 |
Mechanical vibration – Resilient elements used in railway tracks Part 1: Laboratory determination of static and dynamic characteristics Part 2: Determination of static and dynamic characteristics in the track under operation |
|
DIN 45675-2 DIN 45675-3 |
Exposure to mechanical vibration transmitted to the hand-arm system Part 2: Measurement of vibration induced by portable chain saws Part 3: Measurement of vibration induced by portable, internal combustion engine brush saws |
|
DIN 45678 | Mechanical vibration – Articulated trucks – Laboratory method for evaluating vehicle seat vibration | |
DIN V 45679 | Mechanical vibration – Measurement and evaluation of the grip and feed forces for assessing the exposure of the hand-arm system to vibration | |
DIN 45694 | Mechanical vibration – Guideline for the assessment of exposure to hand-transmitted vibration based on information provided by manufacturers of machinery (draft standard) | |
DIN 45695 | Hand-arm vibration – Guidelines for vibration hazards reduction – Engineering and management measures (CR 1030-1 and CR 1030-2) | |
DIN 50100 | Testing of Materials; Continuous Vibration Test; Definitions, Symbols, Procedure, Evaluation | |
DIN 52210 | Testing of acoustics in buildings; airborne impact and sound insulation | |
DIN 70003 | Vibrational stress; measurement of parameters on vehicle parts | |
D5112-98 | Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products | |
D3580-95 | Standard Test Methods for vibration (Vertical Linear Motion) Test of Products | |
EN 1032 | Mechanical vibration – Testing of mobile machinery in order to determine the vibration emission value | |
EN 1033 | Hand-arm vibration – Laboratory measurement of vibration at the grip surface of hand-guided machinery – General | |
EN 1177 | Impact attenuating playground surfacing – Determination of critical fall height | |
EN 1299 | Mechanical vibration and shock – Vibration isolation of machines – Information for the application of source isolation | |
EN 12096 | Mechanical vibration – Declaration and verification of vibration emission | |
EN 12503 | Sports mats – Part 4: Determination of shock absorption | |
EN 12786 | Safety of machinery – Guidance for the drafting of vibration clauses of safety standards | |
EN 13059 | Safety of industrial trucks – Test methods for measuring vibration | |
EN 13490 | Mechanical vibration – Industrial trucks – Laboratory evaluation and specification of operator seat vibration | |
EN 14253 | Mechanical vibration – Measurement and calculation of occupational exposure to whole-body vibration with reference to health – Practical guidance | |
EN 28662-1 EN 28662-2 EN 28662-3 EN 28662-5 | Hand-held portable power tools – Measurement of vibrations at the handle Part 1: General (ISO 8662-1) Part 2: Chipping hammers and riveting hammers (ISO 8662-2) Part 3: Rock drills and rotary hammers (ISO 8662-3) Part 5: Pavement breakers and hammers for construction work (ISO 8662-5) |
|
EN 30326-1 | Mechanical vibration – Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements (ISO 10326-1) |
|
EN 60034-14 | Rotating electrical machines – Part 14 : Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration | |
EN 60745 | Hand-held motor-operated electric tools – Safety Part 1: General requirements Part 2-1: Particular requirements for drills and impact tools Part 2-2: Particular requirements for screwdrivers and impact wrenches Part 2-3: Particular requirements for grinders, polishers and disk-type sanders Part 2-4: Particular requirements for sanders and polishers other than disk type Part 2-5: Particular requirements for circular saws Part 2-6: Particular requirements for hammers Part 2-7: Particular requirements for spray guns Part 2-8: Particular requirements for sheet metal shears and nibblers Part 2-9: Particular requirements for tappers Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) Part 2-12: Particular requirements for concrete vibrators Part 2-13: Particular requirements for chain saws Part 2-14: Particular requirements for planers Part 2-15: Particular requirements for hedge trimmers Part 2-16: Particular requirements for tackers Part 2-17: Particular requirements for routers Part 2-18: Particular requirements of strapping tools Part 2-19: Particular requirements for jointers Part 2-20: Particular requirements for band saws Part 2-21: Particular requirements for drain cleaners | |
EN 60994 | Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) | |
EN 61959 | Secondary cells and batteries containing alkaline or other non-acid electrolytes – Mechanical tests for sealed portable secondary cells and batteries | |
ENV 25349 | Mechanical vibration – Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration (ISO 5349) |
|
ENV 28041 | Human response to vibration – Measuring instrumentation (ISO 8041) | |
E90-E350 | Methods for the calibration of vibration and shock pick-ups | |
FD E90-694 | Mechanical vibration and shock – Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system. | |
GB 10068-2000 | Mechanical vibration of certain machines with shaft heights 56 mm and higher–Measurement, evaluation and limits of vibration | |
GB 10070 | Standard of environmental vibration in urban area | |
GB 10434 | Hygienic standard for hand-transmitted vibration in the work environment | |
GB 4869 | Diagnostic criteria and principles of management of occupational vibration disease | |
GB/T 10071 | Measurement method of environmental vibration of urban area | |
GB/T 10084 | Vibration and shock–methods for analysis and presentation of data | |
GB/T 10283 | Portable pneumatic extinguishers–Measurement of hand-transmitted vibration | |
GB/T 10397 | Small and medium power engines-Evaluation of vibration | |
GB/T 10593.3 | Methods of measuring environmental parameters for electric and electronic products–Treatment and induction for the vibration data | |
GB/T 10895 | Centrifuge and separator-Measurement method of mechanical vibration | |
GB/T 10910 | Agricultural wheeled tractors and fieled machinery-Measurement of whole-body vibration of the operator | |
GB/T 11287 | Electrical relays–Part 21: Vibration,shock,bump and seismic tests on measuring relays and protection equipment | |
GB/T 11348.1 GB/T 11348.2 GB/T 11348.3 GB/T 11348.4 GB/T 11348.5 |
Mechanical vibration of non-reciprocating machines–Measurements on rotating shafts and evaluation criteria Part 1: General guidelines Part 2: Large land-based steam turbine generator sets Part 3: Coupled industrial machines Part 4: Gas turbine sets Part 5: Machine sets in hydraulic power generating and pumping plants |
|
GB/T 11706 | Measurement method of vibration for marine engine room auxiliaries | |
GB/T 13364 | Measurement of mechanical vibration for reciprocating pump | |
GB/T 13436 | Technical requirements for torsional vibration measuring instruments | |
GB/T 13441 | Specification for measurement of human exposure to whole-body vibration environment | |
GB/T 13442 | Reduced comfort boundary and evaluation criteria for human exposure to whole-body vibration | |
GB/T 13670 | Mechanical vibration–Measurement and analysis of vibration to which passengers and crew are exposed in railway vehicles | |
GB/T 13823.1 GB/T 13823.2 GB/T 13823.3 GB/T 13823.4 GB/T 13823.5 GB/T 13823.6 GB/T 13823.7 GB/T 13823.8 GB/T 13823.9 GB/T 13823.10 GB/T 13823.11 GB/T 13823.12 GB/T 13823.13 GB/T 13823.14 GB/T 13823.15 GB/T 13823.16 GB/T 13823.17 GB/T 13823.18 |
Methods for the calibration of vibration and shock pick-ups Part 1: Basic concepts Part 2: Primary vibration calibration by laser interferometry Part 3: Comparison(secondary vibration)calibration by sinusoidal excitation Part 4: Testing of magnetic field sensitivity Part 5: Testing of mounting torque sensitivity Part 6: Testing of base strain sensitivity Part 7: Primary vibration calibration by comparison of phase angles Part 8: Testing of transverse vibration sensitivity Part 9: Testing of transverse shock sensitivity Part 10: Methods for the calibration of vibration and shock pick-ups–Secondary shock calibration Part 11: Primary vibration calibration by laser interferometry at low frequencies Part 12: Resonance frequency testing of undamped accelerometers on a steel block Part 13: Primary shock calibration by light cutting Part 14: Primary calibration by centrifuge Part 15: Testing of transient temperature sensitivity Part 16: Testing of temperature response by comparison Part 17: Testing of acoustic sensitivity Part 18: Primary vibration calibration by reciprocity method |
|
GB/T 13824 | Requirements for instruments for measuring vibration severity | |
GB/T 13860 | Mechanical vibrations–Land vehicles-Method for reporting measured data | |
GB/T 13866 | Shock and vibration measurements–Characteristics to be specified for seismic pick-ups | |
GB/T 13876 | Evaluation criteria of whole body vibration of the operator | |
GB/T 14124 | Mechanical vibration and shock–Measurement and evaluation of vibration effects on buildings–Guidelines for the use of basic standard methods | |
GB/T 14125 | Vibration and shock sensitive equipment–Methods of measurement and reporting data of vibration and shock effects in buildings | |
GB/T 14179 | Brush saws–Measurements of hand-transmitted vibration | |
GB/T 14412 | Mechanical vibration and shock–Mechanical mounting of accelerometers | |
GB/T 14696 | Code for the measurement of ship vibration | |
GB/T 14697 | Code for the measurement of local vibration of ship | |
GB/T 14790 | Methods for the measurement and the assessment of human exposure to hand-transmitted vibration | |
GB/T 15619 | Terminology for human exposure to mechanical vibration and shock | |
GB/T 16301 | Evaluation of vibration severity for marine engine-room auxiliaries | |
GB/T 16440 | Vibration and shock–Mechanical driving point impedance of the human body | |
GB/T 16441 | Vibration and shock–Mechanical transmissibility of the human body in the z direction | |
GB/T 16539 | Determination of sound power levels of noise sources using vibration velocity–Measurement for seal machinery | |
GB/T 16768 | Metal-cutting machine tools–Measurement method for vibration | |
GB/T 16908 | Mechanical vibration–Balancing–Shaft and fitment key convention | |
GB/T 17046 | Vibratory rollers Parts The evaluation to exposure mechanical vibration | |
GB/T 17189 | Code for field measurement of vibrations and pulsations in hydraulic machines | |
GB/T 17958 | Requirements for vibration hazards reduction of hand-held machines at the workplace | |
GB/T 18051 | Tests of electric submersible pump system vibration | |
GB/T 18368 | Comfort evaluation of human exposure to whole-body vibration in recumbent position | |
GB/T 18703 | Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand | |
GB/T 18707.1 | Mechanical vibration–Laboratory method for evaluating vehicle seat vibration–Part 1: Basic requirements | |
GB/T 2298 | Mechanical vibration and shock-Terminology | |
GB/T 2414.1 GB/T 2414.2 |
Test methods for the properties of piezoelectric ceramics Part 1: Radial extension vibration mode for disk Part 2: Transverse length extension vibration mode for bar |
|
GB/T 2423.10 GB/T 2423.11 GB/T 2423.12 GB/T 2423.14 GB/T 2423.42 GB/T 2423.43 GB/T 2423.47 GB/T 2423.48 GB/T 2423.49 |
Environmental testing for electric and electronic products–Part 2: Test methods Part 10: Test Fc and guidance: Vibration (Sinusoidal) Part 11: Test Fd: Random vibration wide band Part 12: Test Fda: Random vibration wide band–Reproducibility high Part 14: Test Fdc: Random vibration wide band–Reproducibility low Part 42: Combined low temperature/low air pressure / vibration (sinusoidal) test Part 43: Mounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ca) Part 47: Test Fg: Vibration, acoustically induced Part 48: Test Ff:Vibration–Time-history method Part 49: Test Fe: Vibration–sine-beat method |
|
GB/T 3389.4 GB/T 3389.5 GB/T 3389.6 |
Test methods for the properties of piezoelectric ceramics Part 4: Longitudinal length extension vibration mode for rod Part 5: Thickness extension vibration mode for disk Part 6 Thickness-shear vibration mode for rectangular plate: |
|
GB/T 4451 | Methods of vibration (sinusoidal) test for use in industrial process measurement and control instrument | |
GB/T 4857.10 | Packaging–Transport packages–Sinusoidal vibration test method using a variable vibration frequency | |
GB/T 4857.7 | Packaging–Transport packages–Sinusoidal vibration test method at constant frequency | |
GB/T 5170.13 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products–Mechanical vibrating type machines for vibration (sinusoidal ) test | |
GB/T 5170.15 | Inspection methods for basic parameters of environmental testing equipments for electric and electronic products–Hydraulic vibrating type machines for vibration | |
GB/T 5395 | Portable chain saws-Measurement of hand-transmitted vibration | |
GB/T 5913 | Mechanical vibration of machines and equipments in diesel locomotive Evaluation of vibration severity in site | |
GB/T 6444 | Mechanical vibration–Balancing vocabulary | |
GB/T 6587.4 | Vibration tests for electronic measuring instruments | |
GB/T 7031 | Vehicle vibration–Describing method for road surface irregularity | |
GB/T 7183 | Evaluation of mechanical vibration severity of machines and equipments in electric locomotives | |
GB/T 7184 | Measurement method of vibration for small and medium power diesel engines | |
GB/T 7452.1 | Guidelines for the overall evaluation of vibration in merchant ships | |
GB/T 7452.2 | Guidelines for the overall evaluation of vibration in merchant ships under 100m | |
GB/T 7453 | Measurement of ship vibration | |
GB/T 8543 | Determination of mechanical vibrations of gear units during acceptance testing | |
IEC 60034-14 | Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration severity |
|
IEC 60068-2-.. | Environmental testing Part 2: Methods of test |
|
IEC 60068-3-8 | Environmental testing Part 3-8: Supporting documentation and guidance – Selecting amongst vibration tests |
|
IEC 60255-21 | Electrical relays Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment |
|
IEC 60512-6-4 IEC 60512-6-5 |
Electromechanical components for electronic equipment – Basic testing procedures and measuring methods – Part 6-4: Dynamic stress tests – Test 6d: Vibration (sinusoidal) Part 6: Dynamic stress tests – Section 5: Test 6e: Random vibration |
|
IEC 60721-2-6 | Classification of environmental conditions Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock |
|
IEC 60994 | Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) | |
IEC 60745 | Hand-held motor-operated electric tools – Safety | |
IEC 60749-12 | Semiconductor devices – Mechanical and climatic test methods Part 12: Vibration, variable frequency |
|
IEC 61300-2-1 | Fibre optic interconnecting devices and passive components – Basic test and measurement procedures Part 2-1: Tests – Vibration (sinusoidal) |
|
IEC 61373 | Railway applications. Rolling stock equipment. Shock and vibration tests | |
IEC 61502 | Nuclear power plants – Pressurized water reactors – Vibration monitoring of internal structures | |
IEEE 344 | IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations | |
IEEE 1451.4 | IEEE Standard for A Smart Transducer Interface for Sensors and Actuators–Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats | |
ISA-RP37.2 | Guide for Specifications and Tests for Piezoelectric Acceleration Transducers for Aerospace Testing | |
ISO 140 | Acoustics — Measurement of sound insulation in buildings and of building elements | |
ISO 1925 | Mechanical vibration – Balancing – Vocabulary | |
ISO 1940-1 ISO 1940-2 |
Mechanical vibration – Balance quality requirements of rigid rotors Part 1: Determination of permissible residual unbalance Part 2: Balance errors |
|
ISO 2017 | Method for specifying characteristics of vibration and shock isolators | |
ISO 2041 | Vibration and shock – Vocabulary | |
ISO 2247 | Packaging — Complete, filled transport packages and unit loads — Vibration tests at fixed low frequency | |
ISO 2371 | Field balancing equipment – Description and evaluation (withdrawn) | |
ISO 2372 | Mechanical vibration of machines with operating speeds from 10 to 200 rev/s – Basis for specifying evaluation standards (withdrawn, replaced by ISO 10816-1) | |
ISO 2373 | Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm — Measurement and evaluation of the vibration severity (withdrawn) | |
ISO 2631-1 ISO 2631-2 ISO 2631-4 ISO 2631-5 |
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration Part 1: General requirements Part 2: Vibration in buildings (1 Hz to 80 Hz) Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems Part 5: Method for evaluation of vibration containing multiple shocks |
|
ISO 2671 | Environmental tests for aircraft equipment — Part 3.4 : Acoustic vibration | |
ISO 2953 | Balancing machines – Description and evaluation | |
ISO 2954 | Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity | |
ISO 3046-5 | Reciprocating internal combustion engines — Performance Part 5: Torsional vibrations |
|
ISO 3945 | Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s – Measurement and evaluation of vibration severity in situ (withdrawn, replaced by ISO 10816) | |
ISO 4866 | Evaluation and measurement for vibration in buildings. Guide for measurement of vibrations and evaluation of their effects on buildings | |
ISO 4867 | Method for measurement and reporting of shipboard vibration data | |
ISO 4868 | Method for measurement and reporting of local vibration data of ship structures and equipment | |
ISO 5007 | Agricultural wheeled tractors. Operator’s seat. Laboratory measurement of transmitted vibration | |
ISO 5008 | Agricultural wheeled tractors and field machinery. Measurement of whole-body vibration of the operator | |
ISO 5344 | Electrodynamic vibration generating systems – Performance characteristics | |
ISO 5347-4 ISO 5347-5 ISO 5347-6 ISO 5347-7 ISO 5347-8 ISO 5347-10 ISO 5347-11 ISO 5347-12 ISO 5347-13 ISO 5347-14 ISO 5347-15 ISO 5347-16 ISO 5347-17 ISO 5347-18 ISO 5347-19 ISO 5347-22 |
Methods for the calibration of vibration and shock pick-ups Part 4: Secondary shock calibration Part 5: Calibration by Earth’s gravitation Part 6: Primary vibration calibration at low frequencies Part 7: Primary calibration by centrifuge Part 8: Primary calibration by dual centrifuge Part 10: Primary calibration by high impact shocks Part 11: Testing of transverse vibration sensitivity Part 12: Testing of transverse shock sensitivity Part 13: Testing of base strain sensitivity Part 14: Resonance frequency testing of undamped accelerometers on a steel block Part 15: Testing of acoustic sensitivity Part 16: Testing of mounting torque sensitivity Part 17: Testing of fixed temperature sensitivity Part 18: Testing of transient temperature sensitivity Part 19: Testing of magnetic field sensitivity Part 22: Accelerometer resonance testing — General methods |
|
ISO 5348 | Mechanical vibration and shock – Mechanical mounting of accelerometers | |
ISO 5349-1 ISO 5349-2 |
Mechanical vibration – Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements Part 2: Practical guidance for measurement at the workplace |
|
ISO 5805 | Mechanical vibration and shock affecting man – Vocabulary | |
ISO 5982 | Mechanical vibration and shock — Range of idealized values to characterize seated-body biodynamic response under vertical vibration | |
ISO 6070 | Auxiliary tables for vibration generators – Methods of describing equipment characteristics | |
ISO 6721 | Determination of dynamic mechanical properties | |
ISO 6897 | Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz) | |
ISO 6954 | Mechanical vibration. Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships | |
ISO 7096 | Earth-moving machinery. Laboratory evaluation of operator seat vibration | |
ISO 7505 | Forestry machinery — Chain saws — Measurement of hand-transmitted vibration | |
ISO 7626-1 ISO 7626-2 ISO 7626-5 |
Vibration and shock – Experimental determination of mechanical mobility Part 1 : Basic definitions and transducers Part 2: Measurements using single-point translation excitation with an attached vibration exciter Part 5: Measurements using impact excitation with an exciter which is not attached to the structure |
|
ISO/TR 7849 | Acoustics — Estimation of airborne noise emitted by machinery using vibration measurement | |
ISO 7916 | Forestry machinery — Portable brush-saws — Measurement of hand-transmitted vibration | |
ISO 7919-1 ISO 7919-2 ISO 7919-3 ISO 7919-4 ISO 7919-5 |
Mechanical vibration of non-reciprocating machines -Measurements on rotating shafts and evaluation Part 1: General guidelines Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min Part 3: Coupled industrial machines Part 4: Gas turbine sets Part 5: Machine sets in hydraulic power generating and pumping plants |
|
ISO 8002 | Method for reporting measured vibration data for land vehicles | |
ISO 8041 | Human response to vibration. Measuring instrumentation | |
ISO 8042 | Shock and vibration measurements – Characteristics to be specified for seismic pick-ups | |
ISO 8313 | Packaging — Complete, filled transport packages and unit loads — Sinusoidal vibration tests using a variable frequency | |
ISO 8568 | Mechanical shock – Testing machines – Characteristics and performance | |
ISO 8569 | Mechanical vibration and shock — Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings | |
ISO 8528-9 | Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations | |
ISO 8579-2 | Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
|
ISO 8608 | Mechanical vibration — Road surface profiles — Reporting of measured data | |
ISO 8626 | Servo-hydraulic test equipment for generating vibration – Method of describing characteristics | |
ISO 8662-1 ISO 8662-2 ISO 8662-3 ISO 8662-4 ISO 8662-5 ISO 8662-6 ISO 8662-7 ISO 8662-8 ISO 8662-9 ISO 8662-10 ISO 8662-11 ISO 8662-12 ISO 8662-13 ISO 8662-14 |
Hand-held portable power tools — Measurement of vibrations at the handle Part 1: General Part 2: Chipping hammers and riveting hammers Part 3: Rock drills and rotary hammers Part 4: Grinders Part 5: Pavement breakers and hammers for construction work Part 6: Impact drills Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action Part 8: Polishers and rotary, orbital and random orbital sanders Part 9: Rammers Part 10: Nibblers and shears Part 11: Fastener driving tools Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action Part 13: Die grinders Part 14: Stone-working tools and needle scalers |
|
ISO 8727 | Mechanical vibration and shock. Human exposure. Biodynamic coordinate systems | |
ISO 8821 | Mechanical vibration – Balancing – Shaft and fitment key convention | |
ISO 9688 | Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses | |
ISO 9996 | Mechanical vibration and shock — Disturbance to human activity and performance — Classification | |
ISO 11342 | Mechanical vibration – Methods and criteria for the mechanical balancing of flexible rotors | |
ISO 10055 | Mechanical vibration — Vibration testing requirements for shipboard equipment and machinery components | |
ISO 10056 | Mechanical vibration. Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles | |
ISO 10068 | Mechanical vibration and shock — Free, mechanical impedance of the human hand-arm system at the driving point | |
ISO 10326-1 ISO 10326-2 |
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements Part 2: Application to railway vehicles |
|
ISO/TS 10811-1 ISO/TS 10811-2 |
Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment Part 1: Measurement and evaluation Part 2: Classification |
|
ISO 10813-1 ISO 10813-3 |
Vibration generating machines — Guidance for selection Part 1: Equipment for environmental testing Part 3: Equipment to be used in a shock mode (draft standard) |
|
ISO 10814 | Mechanical vibration — Susceptibility and sensitivity of machines to unbalance | |
ISO 10815 | Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains | |
ISO 10816-1 ISO 10816-2 ISO 10816-3 ISO 10816-4 ISO 10816-5 ISO 10816-6 |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ Part 4: Gas turbine driven sets excluding aircraft derivatives Part 5: Machine sets in hydraulic power generating and pumping plants (available in English only) Part 6: Reciprocating machines with power ratings above 100 kW |
|
ISO 10817-1 | Rotating shaft vibration measuring systems — Part 1: Relative and absolute sensing of radial vibration | |
ISO 10819 | Mechanical vibration and shock. Hand-arm vibration. Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand | |
ISO 10846-1 ISO 10846-2 ISO 10846-3 ISO 10846-4 |
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 1: Principles and guidelines Part 2: Dynamic stiffness of elastic supports for translatory motion — Direct method Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
|
ISO 11342 | Mechanical vibration — Methods and criteria for the mechanical balancing of flexible rotors | |
ISO 13090-1 | Mechanical vibration and shock – Guidance on safety aspects of tests and experiments with people Part 1: Exposure to whole-body mechanical vibration and repeated shock |
|
ISO 13091-1 ISO 13091-2 |
Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 1: Methods of measurement at the fingertips Part 2: Analysis and interpretation of measurements at the fingertips |
|
ISO 13332 | Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet | |
ISO 13350 | Industrial fans — Performance testing of jet fans | |
ISO 13355 | Packaging. Complete, filled transport packages and unit loads. Vertical random vibration test | |
ISO 13373-1 | Condition monitoring and diagnostics of machines. Vibration condition monitoring. Part 1: General procedures |
|
ISO 13374 | Condition monitoring and diagnostics of machines – Data processing, communication and presentation | |
ISO 13379 | Condition monitoring and diagnostics of machines – General guidelines on data interpretation and diagnostics techniques | |
ISO 13753 | Mechanical vibration and shock – Hand-arm vibration – Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system | |
ISO 14694 | Industrial fans — Specifications for balance quality and vibration levels | |
ISO 14695 | Fans for general purposes. Method of measurement of fan vibration | |
ISO 14839-1 ISO 14839-2 |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings Part 1: Vocabulary Part 2: Evaluation of vibration |
|
ISO 14963 | Mechanical vibration and shock — Guidelines for dynamic tests and investigations on bridges and viaducts | |
ISO 14964 | Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration | |
ISO 15242-1 ISO 15242-2 ISO 15242-3 ISO15242-4 |
Rolling bearings — Measuring methods for vibration Part 1: Fundamentals Part 2: Radial ball bearings with cylindrical bore and outside surface Part 3: Radial double-row spherical and tapered roller bearings with cylindrical bore and outside surface Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface |
|
ISO 15243 | Rolling bearings — Damage and failures — Terms, characteristics and causes | |
ISO/TS 15694 | Mechanical vibration and shock — Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system | |
ISO 16063-1 ISO 16063-11 ISO 16063-12 ISO 16063-13 ISO 16063-15 ISO 16063-16 ISO 16063-21 ISO 16063-22 ISO 16063-31 ISO 16063-41 |
Methods for the calibration of vibration and shock transducers Part 1: Basic concepts Part 11: Primary vibration calibration by laser interferometry Part 12: Primary vibration calibration by the reciprocity method Part 13: Primary shock calibration using laser interferometry Part 15: Primary angular vibration calibration by laser interferometry Part 16: Calibration by Earth’s gravitation Part 21: Vibration calibration by comparison with a reference transducer Part 22: Shock calibration by comparison with a reference transducer (replacement for ISO 5347-4) Part 31: Testing of transverse vibration sensitivity Part 41: Calibration of laser vibrometers |
|
ISO 18431-1 ISO 18431-2 ISO 18431-4 |
Mechanical vibration and shock — Signal processing Part 1: General introduction Part 2: Time domain windows for Fourier Transform analysis Part 4: Shock-response spectrum analysis |
|
ISO 18436-1 ISO 18436-2 |
Condition monitoring and diagnostics of machines — Requirements for training and certification of personnel Part 1: Requirements for certifying bodies and the certification process Part 2: Vibration condition monitoring and diagnostics |
|
ISO 18649 | Mechanical vibration — Evaluation of measurement results from dynamic tests and investigations on bridges | |
ISO 20643 | Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission | |
ISO 22867 | Forestry machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles | |
JIS B 0906 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — General guidelines | |
JIS B 0907 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity | |
JIS B 0910 | Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria | |
JIS B 0911 | Mechanical vibration — Susceptibility and sensitivity of machines to unbalance | |
JIS B 1754 | Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
|
JIS C 1510 | Vibration level meters | |
JIS C 1512 | Level recorders for recording sound level and/or vibration level | |
JIS D 1601 | Vibration testing methods for automobile parts | |
JIS E 3014 | Parts for railway signal -Vibration test methods | |
JIS E 4023 | Vibration characteristics of railway rolling stock — Measuring methods | |
JIS E 4031 | Railway rolling stock parts — Test methods for vibration | |
JIS Z 0232 | Packaged freights — Method of vibration test | |
JIS Z 8735 | Methods of measurement for vibration level | |
MIL-A-8870C | Airplane Strength and Rigidity Vibration, Flutter, and Divergence | |
MIL-STD-167 | Mechanical Vibrations On Ship Board Systems | |
MIL-STD-167/1 | Mechanical Vibrations of Shipboard Equipment (Type I – Environmental and Type II – Internally Excited) | |
MIL-STD-167/2 | MIL-STD-167/2 Mechanical Vibrations of Shipboard Equipment (Reciprocating Machinery and Propulsion System and Shafting) Types III, IV, and V | |
MIL-STD-202G | Test Method 201A: Vibration | |
MIL-STD-202G | Test Method 204D: Vibration, High Frequency | |
MIL-STD-202G | Test Method 214A: Random Vibration | |
MIL-STD-810F | Test Method Standard For Environmental Engineering | |
NEMA MG1 | Assists users in the proper selection and application of motors and generators. | |
NF S30-102 | Acoustics. Terminology. Transmission systems and transducers for sound and vibrations | |
PD 6585-2 | Hand-arm vibration. Guidelines for vibration hazards reduction. Management measures at the workplace | |
S31-087 | Acoustics. Estimation of airborne noise emitted by machinery using vibration measurement | |
SN 640312a | Vibration immission in buildings | |
UIC 513 | Guidelines for evaluating passenger comfort in relation to vibration in railway vehicles | |
UNI 9916 | Criteria for the measurements of vibrations and the assessment of their effects on buildings | |
UNI 9942 | Methods for measurement of vibrations generated internally of railways tunnels | |
VDI 2038-1 | Serviceability of structures under dynamic loads – Methods of analysis and evaluation in structural dynamics – Basics, methods, procedures and load | |
VDI 2056 | Evaluation of mechanical vibrations of rotating machinery (withdrawn); replacement: ISO 10816 | |
VDI 2057-1 VDI 2057-2 VDI 2057-3 VDI 2057-4.1 VDI 2057-4.2 VDI 2057-4.3 |
Human exposure to mechanical vibrations Part 1: Whole-body vibration Part 2: Hand-arm vibration Part 3: Assessment (withdrawn) Part 4.1: Measurements and assessment for workshop places in buildings Part 4.2: Measurement and evaluation for workshop places on vehicles (withdrawn) Part 4.3: Measurements and assessment for ships and floating vessels (withdrawn); replacement: ISO 6954 |
|
VDI 2059-1 VDI 2059-3 VDI 2059-4 VDI 2059-5 |
Shaft vibrations of turbosets; principles for measurement and evaluation Shaft vibrations of industrial turbosets; measurement and evaluation Shaft vibrations of gas turbosets; measurement and evaluation Shaft vibrations of gas turbosets; measurement and evaluation |
|
VDI 2062 | Shock and vibration isolation Part 1: Conceptions and principles Part 2: Isolation elements, materials and component parts of isolation |
|
VDI 2063 | Measurement and evaluation of mechanical vibrations of reciprocating piston engines and piston compressors (withdrawn); replacement: VDI 3838 | |
VDI 2064 | Active vibration isolation | |
VDI 2149 | Transmission dynamics; elastic mechanisms | |
VDI 3832 | Measurement of structure-borne sound of rolling element bearings in machines and plants for evaluation of state condition | |
VDI 3834 | Part 1: Measurement and evaluation of the mechanical vibrations of wind energy plants and their components – Wind energy plants with gears | |
VDI 3836 | Measurement and evaluation of mechanical vibration of screw-type compressors and Root blowers | |
VDI 3837 | Groundborne vibration arising from rail systems at grade – Spectral prediction method | |
VDI 3838 | Measurement and evaluation of mechanical vibration of reciprocating piston engines and piston compressors with power ratings above 100 kW – Addition to ISO 10816-6 | |
VDI 3839-1 VDI 3839-2 VDI 3839-4 VDI 3839-5 VDI 3839-8 |
Instructions on measuring and interpreting the vibrations of machines Part 1: General principals Part 2: Vibration patterns for excitation arising from unbalance, incorrect assembly, bearing faults and damage to rotating components Part 4: Typical vibration patterns with fans (draft) Part 5: Typical vibration patterns with electrical machines Part 8: Typical vibration patterns with reciprocating machines |
|
VDI 3840 | Vibration analysis for machine sets | |
VDI 3841 | Vibration monitoring of rotating machinery – necessary measurement | |
VDI 3842 | Vibrations in piping systems |